Visit
to View our Partner Brands
Wet Cleaning Module
-
Designed to run continuously in production line -
Water jets spray outside and inside of the conveyor chain -
Completely mechanical, does not require electrical components, programming or secondary motor
Contact Us
Conveyor specialists are ready to help you find the right solution
Benefits of the Wet Cleaning Module:
- Wet Cleaning Module provides continuous cleaning of conveyor chain for applications with liquid or product overfill or package breakage
- Water jets spray outside and inside of the conveyor chain
- Series Driven Brush scrubs top and bottom surface of chain
- Air knifes blow off water from chain
- Vacuum draws away excess water
- Designed to run continuously in production line
- Allows for longer, cleaner production runs with less overall maintenance
- Clean design with minimal area for dirt and debris to accumulate
- Fully encased components with cover designed for worker safety
- Completely mechanical, does not require electrical components, programming or secondary motor
Features & Specifications
- Available on FlexMove Stainless Steel Conveyors SS (65 mm) and SM (85 mm)
- Size Requirement: 700 mm (L) x 700 mm (H)
- Minimum top of chain height: 750 mm (29.5 in)
- Maximum conveyor length: 4.5 m (14.8 ft)
- Maximum conveyor speed: 50 m/min (164 ft/min)
Operating Requirements:
Air Supply
- Connection: 8 mm tubing
- Air pressure required: 0.69 MPa (100 PSI)
Water Supply
- Connection 3/8 in NPT
- Normal operating pressure 0.98MPa. (140 psi)
- Flow rate required: ~13 litre/min (0.5 CFM)
Drying Vacuum
- Vacuum attachment: OD Ø38 mm, ID Ø34 mm pipe.
- Vacuum airflow required: ~56 litre/s (120 CFM), typical commercial grade wet/dry vacuum is acceptable
Chain Cleaning Flow Diagram
Dimensions
Manuals & Literature
Looking for Service Manuals? Search for Service Manuals by part number or product type HERE.
| Literature | |
| FlexMove Wet Cleaning Module |